Axis Communications Updated ANVE Exam Questions and Answers by amora

When using the AXIS Design Tool, it is crucial to convey to the end user that the calculations provided are only estimates and not final numbers. The tool is designed to offer a rough estimate of network bandwidth and storage needs based on various factors such as camera resolution, frame rate, and compression. However, real-world conditions and specific system configurations can affect these calculations, so they should be treated as approximations rather than exact figures.

The feature in Axis cameras that allows a fixed box style camera to tell a PTZ camera to move to a preset is the HTTP server. Axis cameras can use HTTP commands to communicate with each other over the network. By sending an HTTP request from a fixed camera, the PTZ camera can be directed to move to a specific preset position, enabling coordinated surveillance coverage.

The AXIS T8414 Installation Display is a portable tool used for easy and efficient installation of network cameras. It can power up a PoE (Power over Ethernet) camera, allowing the installer to work without needing an additional power source. Additionally, the display can take snapshots, which helps in verifying the camera's field of view and focus during installation. It does not support accessing a camera's home page, resetting to factory defaults, or reading user documentation directly. For more details, refer to Axis Communications' product manual for the AXIS T8414 Installation Display.

Top of Form

Bottom of Form

Disconnecting the power and network cables before replacing a camera lens is crucial because there is a risk of short-circuiting the camera electronics. If the camera is powered on while the lens is being replaced, accidental contact with electronic components can cause a short circuit, potentially damaging the camera.