Cisco Updated 350-701 Exam Questions and Answers by camille

ExplanationThe command “snmp-server user user-name group-name [remote ip-address [udp-port port]] {v1 | v2c | v3 [encrypted] [auth {md5 | sha} auth-password]} [access access-list]” adds a new user (in this case “andy”) to an SNMPv3 group (in this case group name “myv3”) and configures a password for the user.In the “snmp-server host” command, we need to:+ Specify the SNMP version with key word “version {1 | 2 | 3}”+ Specify the username (“andy”), not group name (“myv3”).Note: In “snmp-server host inside …” command, “inside” is the interface name of the ASA interface through which the NMS (located at 10.255.254.1) can be reached.

Cisco Identity Services Engine (ISE) is a product that provides comprehensive and scalable access policy enforcement for wired and wireless networks. ISE supports TACACS+ for device administration, which allows for granular control over the commands and actions that network administrators can perform on network devices. ISE also supports 802.1X, MAB, and WebAuth for network access, which enables authentication and authorization of users and endpoints based on various attributes, such as identity, device type, posture, location, and time. ISE can also integrate with other Cisco security products, such as Cisco Stealthwatch and Cisco AMP for Endpoints, to provide enhanced visibility and threat detection. Therefore, ISE is the product that meets all of the requirements stated in the question. References :=

Some possible references are:

• Implementing and Operating Cisco Security Core Technologies (SCOR) v1.0, Module 4: Secure Network Access, Identity Management, and Secure Access
• TACACS+ Configuration Guide, Configuring TACACS
• Cisco Identity Services Engine Administrator Guide, Release 2.7, Device Administration
• Cisco Identity Services Engine Administrator Guide, Release 2.7, Network Access Devices
• Cisco Identity Services Engine Administrator Guide, Release 2.7, Policy Sets

Active Directory (AD) is an ID store that requires that a shadow user be created on Cisco ISE for the admin login to work. A shadow user is a user account that is defined in the ISE internal database, but has the password set to external. This means that the user authentication is performed against an external identity source, such as AD, while the user authorization is based on the ISE admin group membership. A shadow user is useful when the admin wants to assign different roles or permissions to specific AD users, rather than using AD groups. To create a shadow user, the admin must check the External checkbox in the ISE admin user configuration, and make sure that the username matches the AD username. The shadow user must also be assigned to an ISE admin group that has the Type set to External123. References := 1: ISE Admin User Shadow AD Account Issue 2: ISE Admin user authentication from AD 3: Which ID store requires that a shadow user be created on Cisco ISE for the admin login to work?