VMware Updated 2V0-41.24 Exam Questions and Answers by stella

vrf 3: The VRF ID for the Tier-0 Service Router (SR) is 3, as indicated in the output. To check the BGP neighbor status, you need to enter the correct VRF context.

sa-nsxedge-01(tier0_sr)> get bgp neighbor: This command retrieves the BGP neighbor status on the Tier-0 Service Router, which is where BGP neighbors are configured in NSX environments.

The esxcli network firewall ruleset set -r syslog -e true command is used to enable the firewall ruleset for syslog on an ESXi host. Setting the -e flag to true allows syslog traffic through the ESXi firewall, enabling remote logging for syslog messages from the transport node.

If Distributed Firewall Rule hit counts are not being logged, it is likely because Distributed Firewall Rule logging is not enabled. For hit counts to appear in the logs, logging must be explicitly enabled on each firewall rule where tracking is required. Without enabling logging at the rule level, no hit count information will be recorded in syslog.

Core Files should be excluded when collecting support bundles through NSX Manager because they may contain sensitive information, such as memory dumps that could reveal sensitive data from processes at the time of an issue. Excluding core files helps ensure that potentially sensitive data is not unintentionally shared.