PCI SSC Updated CPSA_P_New Exam Questions and Answers by ruth

According to the PCI Card Production and Provisioning – Logical Security Requirements, there must be a clear segregation of duties between the staff involved in different card production and provisioning activities, such as card personalization, PIN generation and printing, and card fulfillment. This is to prevent any unauthorized access, modification, or disclosure of sensitive cardholder data and to ensure the integrity and confidentiality of the card production process. Therefore, if John is involved in card personalization, which is the process of transferring cardholder information to a payment card, then he must never be involved in PIN printing, which is the process of printing the personal identification number associated with the cardholder account on a mailer. This way, John cannot link the cardholder data on the card with the PIN on the mailer, and cannot compromise the security of the cardholder authentication. The other statements are not true, as there is no requirement that prohibits John from being involved in the card shipment process, as long as he does not have access to both the card and the PIN mailer at the same time. References:

• Payment Card Industry (PCI) Card Production and Provisioning – Logical Security Requirements, Section 2.1.1 and 2.1.2
• Payment Card Industry (PCI) Card Production and Provisioning – Glossary of Terms, Abbreviations, and Acronyms, Definitions of Card Personalization and PIN Printing

According to the PCI Card Production Physical Security Requirements, the vendor must ensure that a clear segregation of duties is maintained between guard and reception related job functions. This is to prevent any conflict of interest or collusion that could compromise the security of the card production and provisioning processes or the cardholder data. The vendor must also ensure that the guards are adequately trained, supervised, and evaluated, and that they follow the security policies and procedures established by the vendor. The vendor must also have a documented policy and procedure for the selection, hiring, and termination of guards, and must maintain a log of all guard activities. References:

• PCI Card Production Physical Security Requirements, v2.0, April 2019, page 24, requirement 6.1.1
• PCI Card Production Physical Security Requirements, v2.0, April 2019, page 25, requirement 6.1.2
• PCI Card Production Physical Security Requirements, v2.0, April 2019, page 26, requirement 6.1.3
• PCI Card Production Physical Security Requirements, v2.0, April 2019, page 27, requirement 6.1.4

 According to the PCI Card Production Physical Security Requirements, one of the objectives of physical security is to deter, detect, and delay unauthorized access to card production facilities and equipment. This objective requires that the facility has adequate security measures to prevent or respond to any physical attacks or intrusions, such as alarms, locks, cameras, guards, etc. However, these measures may not be sufficient if the facility is located in a rural area, where law enforcement services may not be able to reach the facility in a timely manner in case of an emergency. Therefore, the location of the facility may pose a risk to the security of card production and provisioning activities, and the CPSA should assess the adequacy of the facility’s security plan and procedures to mitigate this risk. References: PCI Card Production Physical Security Requirements, Version 1.0, April 2019, Section 1.1, Objective 1, Page 41

According to the PCI Card Production and Provisioning Physical Security Requirements, the vendor must have an alarm system that monitors and detects unauthorized access to the card production and provisioning facilities, and that alerts the security control room or a central monitoring service. The alarm system must also be able to identify the location and cause of the alarm, and allow authorized personnel to reset it. The alarm system must be operational 24/7, and must be tested at least annually. The vendor must also have procedures to respond to alarms and incidents, and to report them to the relevant parties. If the alarm system does not send alerts to the security control room, or a central monitoring service, during working hours, the vendor may not be able to comply with these requirements, and may not be able to prevent, detect, or respond to unauthorized access or security breaches. This may cause a problem for their assessment, as they may not meet the PCI Card Production and Provisioning Physical Security Requirements. References: PCI Card Production and Provisioning Physical Security Requirements and Test Procedures v3.0, January 2022, pages 9-101