CompTIA Updated 220-1101 Exam Questions and Answers by arwa

Looking at the network configurations and outputs from both PCs and servers, here are the possible issues and solutions:

1. PC 1

Issue: The IP address for PC1 is 192.168.1.1, which conflicts with Server 1 (which also uses 192.168.1.1).

Solution: Change the IP address on PC1 to a unique one within the range, like 192.168.1.3.

2. PC 2

Issue: PC 2 is configured with 192.168.1.2, which conflicts with Server 2 that has the same IP address.

Solution: Update the IP address on PC 2 to something unique, like 192.168.1.4.

3. Server 1

Issue: The IP address for Server 1 is 192.168.1.1, which conflicts with PC1.

Solution: Since Server 1 and PC1 are using the same IP address, change one of them. For Server 1, you could change the IP address to 192.168.1.5.

4. Server 2

Issue: Server 2 is using the IP address 192.168.1.2, which conflicts with PC2.

Solution: Update Server 2 to use a different IP address, such as 192.168.1.6.

General Remediation:

The primary problem here is overlapping IP addresses, leading to connectivity issues. Each device on the network must have a unique IP address. After making these changes, ensure that all devices can communicate properly by testing the connection between devices and verifying they can access shared resources.

NFC (Near Field Communication) devices commonly authenticate users through methods like badging, where a user’s badge or ID card, enabled with NFC, grants access. Passwords and passcodes are not NFC methods, while biometrics are typically used in high-security areas with specific hardware. NFC’s authentication, as outlined in the CompTIA A+ Core 1 objectives, facilitates access in environments needing convenient user verification.

Secure Shell (SSH) is a protocol used to securely access and manage devices over a network. It provides a secure channel over an unsecured network in a client-server architecture, enabling technicians to perform troubleshooting and management tasks remotely with encryption to ensure the security of the data transmitted. FTP and TFTP are used for file transfers and do not inherently provide the same level of security or direct device management capabilities. RDP is used for remote desktop connections but is not as universally applicable for various devices as SSH.

A common reason for a POST failure after a motherboard installation is improperly seated RAM. The system requires working memory to successfully complete POST. Reseating (removing and reinserting) the RAM ensures it's making proper contact with the motherboard.

Option A: Flashing the BIOS is not possible if the system won’t POST.

Option B: A dead CMOS battery can cause BIOS settings to reset, but it usually won’t prevent POST entirely.

Option D: Reinstalling the old motherboard is premature — basic troubleshooting steps should be completed first.

CompTIA A+ Core 1 Exam Objective Reference:

Objective 3.5: Given a scenario, troubleshoot problems related to motherboards, RAM, CPU, and power.